DCP 111/2 is a heavy-duty, water-based cleaner and degreaser designed for intensive industrial cleaning applications. It removes grease, carbon deposits, soot and metal contamination effectively on various surfaces, including glass and stainless steel.
This excellent alternative for hazardous solvents is safe to use on metal surfaces below 55 °C and remains effective even in hard water.
The 1000L IBC format is suited for bulk use in industrial cleaning systems, production lines or centralised maintenance operations.
Classification: H314 (causes severe skin burns and eye damage)
Appearance at 20 °C: Clear liquid
Odour: Neutral
Freezing Point: < -4 °C
Storage: 0 – 35 °C
Flammability: None
Cloud Point: 54 °C
pH at 20 °C: 12.7 (100%)
Density at 20 °C: 1.06 g/cm³
Solubility in water: Fully
Applications
Metal parts: including stainless steel, titanium, and copper
Plastics, rubbers and epoxy resins
Lacquered or coated surfaces
Painted surfaces
Ceramics
(Natural) stone: granite, marble, slate, etc.
Colorfast fabrics
Glass
Usage instructions
Form: DCP 111-2 can be used in pure or diluted (0.5% - 100%) form.
Ultrasonic Cleaning: Immerse parts in the solution and allow to soak for 2 hours.
Dip Tanks and Parts Washers: Submerge parts, ensuring complete coverage for effective cleaning.
Pressure Washing:Apply directly to surfaces and rinse thoroughly.
Dilution instructions:
According to degree of soiling, allow to soak in from a few moments to several minutes.
- Very heavy pollution: 1:1 to 1:3
- Heavy pollution: 1:3 to 1:5
- Medium pollution: 1:5 to 1:20
- Light pollution: 1:20 to 1:50
- Glossy surfaces: 1:100 to 1:200
Choosing a selection results in a full page refresh.
