DCP ClearStep RTU 1L Spray Ready-2-use Green Deposit Remover

DCP ClearStep RTU effectively fights algae, green deposits and mould on all kinds of surfaces, both indoors and outdoors. Its ready-to-use and odourless formula offers fast visible results and long-lasting protection against new growth.

The compact 1L format is perfect for smaller surfaces like garden furniture, balconies, walls or tiles.

One litre of ClearStep RTU is sufficient to remove moss from approximately 50 m².

DCP ClearStep RTU is a biocidal product intended for both general consumer and professional use.

Available in Belgium, France and Germany.

€4,99 EUR

Tax included. Shipping calculated at checkout.

Volume: 1 litre

5 litre 3 X 5 litre 1 litre 15 X 1 litre 10 litre

View full details

Specifications

Active content: C12-C16 alkylbenzyldimethylammonium chloride (21 g/L)
Classification: H315 (causes skin irritation), H319 (causes serious eye irritation) H412 (harmful to aquatic life with long lasting effects)
Appearance at 20 °C: Clear liquid
Odour: None
Freezing Point: < 0 °C
Storage: 0 – 35 °C
Flammability: None
pH at 20 °C: 7.5 (100%)
Density at 20 °C: 0.99 g/cm³
Solubility in water: Fully

Applications

All materials both indoors and outdoors

Outdoor surfaces: sidewalks, facades, driveways, roofs, terraces
Furniture & structures: garden furniture, verandas
Building materials: concrete, slate
Indoor areas: basements, bathrooms, warehouses
Delicate surfaces: glass, wood

Usage instructions

Surface preparation: Remove as much green deposit and dirt as possible using a brush or scraper.
Application: Follow the instructions of the high- or low-pressure cleaning device to add DCP ClearStep RTU.
Spraying: Evenly apply the product to the soiled surface.
Coverage: 1L of DCP ClearStep RTU covers 50m², depending on surface roughness and structure.
Curing time: Allow at least 24 hours for the product to take effect and ensure 48 hours of dry weather after application.
After drying: Brush off any remaining debris and rinse with clean water if needed for optimal results.
For stubborn contamination: Repeat the treatment if necessary.
Finishing: Treated surfaces can be painted after the cleaning process if desired.