DCP ClearStep RTU 5L Ready-2-use Green Deposit Remover

DCP ClearStep RTU effectively eliminates green deposits, algae and mould from all kinds of surfaces, both indoors and outdoors. The ready-to-use formula acts fast and leaves a long-lasting protective layer. For a fast visibly clean and long-lasting protective result.

DCP ClearStep RTU is a biocidal product intended for both general consumer and professional use.

One litre of ClearStep RTU is sufficient to remove moss from approximately 50 m².

The 5L format is ideal for households with gardens, terraces, or driveways needing seasonal treatment.

Available in Belgium, France and Germany.

€9,99 EUR

Tax included. Shipping calculated at checkout.

Volume: 5 litre

10 litre 15 X 1 litre 1 litre 3 X 5 litre 5 litre

View full details

Specifications

Active content: C12-C16 alkylbenzyldimethylammonium chloride (21 g/L)
Classification: H315 (causes skin irritation), H319 (causes serious eye irritation) H412 (harmful to aquatic life with long lasting effects)
Appearance at 20 °C: Clear liquid
Odour: None
Freezing Point: < 0 °C
Storage: 0 – 35 °C
Flammability: None
pH at 20 °C: 7.5 (100%)
Density at 20 °C: 0.99 g/cm³
Solubility in water: Fully

Applications

All materials both indoors and outdoors

Outdoor surfaces: sidewalks, facades, driveways, roofs, terraces
Furniture & structures: garden furniture, verandas
Building materials: concrete, slate
Indoor areas: basements, bathrooms, warehouses
Delicate surfaces: glass, wood

Usage instructions

Surface preparation: Remove as much green deposit and dirt as possible using a brush or scraper.
Application: Follow the instructions of the high- or low-pressure cleaning device to add DCP ClearStep RTU.
Spraying: Evenly apply the product to the soiled surface.
Coverage: 1L of DCP ClearStep RTU covers 50m², depending on surface roughness and structure.
Curing time: Allow at least 24 hours for the product to take effect and ensure 48 hours of dry weather after application.
After drying: Brush off any remaining debris and rinse with clean water if needed for optimal results.
For stubborn contamination: Repeat the treatment if necessary.
Finishing: Treated surfaces can be painted after the cleaning process if desired.